OEM manufacturer Honeywell Electric Control Valve - 4~20mA Sleeve type high pressure electric control valve – Hoyee
OEM manufacturer Honeywell Electric Control Valve - 4~20mA Sleeve type high pressure electric control valve – Hoyee
OEM manufacturer Honeywell Electric Control Valve - 4~20mA Sleeve type high pressure electric control valve – Hoyee Detail:
4~20mA Sleeve type high pressure electric control valve specification
| Electric control valve Body type: |
straight through casting globe type |
| Spool type: | balanced sleeve plug type |
| Nominal size: | DN25~400,、 NPS 1〞~ 16〞 |
| Nominal pressure: | PN16 ~ 100、 CLASS 150LB ~ 600LB |
| Connection: flange: | FF、RF、MF、RTJ |
| Welding: | SW、BW |
| Flange dimension: | According to to IEC 60534 |
| ZAZM Sleeve electric control valve Bonnet type: | Ⅰ:standard type（-20℃~230℃） Ⅱ:Radiator type: （-45℃~ high than 230℃ occasion） Ⅲ:Low temperature extended type（-196℃~ -45℃） Ⅳ:Bellow seal type Ⅴ:Warm insulation Jacket type |
| Packing: | V type PFTE packing, flex. graphite packing, etc. |
| Gasket: | Metal graphite packing |
| Actuator: | Electric: DZK series actuator. |
4~20mA Sleeve type high pressure electric control valve material list
| Component name | Control Valve Material |
| Body/Bonnet | WCB/WCC/WC6/CF8/CF8M/CF3M |
| Valve spool/Seat | 304/316/316L(overlaying stellite alloy) |
| Packing | Normal:-196～150℃ is PTFE,RTFE,>230℃ is flexible graphite |
| Bellows | 304/316/316L |
| Gasket | Normal:Stainless steel with flexible graphite,Special:Metal tooth type gasket |
4~20mA Sleeve type high pressure electric control valve performance
| Electric control valve Flow characteristic | Linear, Equal percentage, quick open | |
| Allowable range | 50: 1 (CV<6.3 30: 1) | |
| Rated Cv value | Percentage CV1.6~630 ，linear CV1.8~690 | |
| Electric control valve Allowable leakage | Metal seal: IV grade（0.01% rated capacity） Soft seal: VI grade（foam grade） Leakage standard: GB/T 4213 |
|
| ZAZM Sleeve electric control valve Performance | ||
| Intrinsic error (%) | ±1.0 | |
| Return difference(%) | ≤1.0 | |
| Dead zone(%) | ≤1.0 | |
| Difference from beginning to end point(%) | ±2.5 | |
| Rated travel difference(%) | ≤2.5 | |
4~20mA Sleeve type high pressure electric control valve special requirement
| Special test | Material penetration flaw detection (PT), radiator test (RT), flow characteristic test, low temperature test. |
| Special treatment | Trim nitrogen treatment, seat hard alloy treatment. |
| Special rinse | Degreasing and dehydration treatment |
| Special condition | Special piping or connection, vacuum condition, S.S fastener, special coating. |
| Special dimension | Customized face to face length or dimension |
| Test and inspection | Third party test report |
4~20mA Sleeve type high pressure electric control valve actuator Parameter
| Electric control valve Type Method | Electric actuator |
| 3810L series | |
| Intelligent integrated type | |
| Usage | Regulating |
| Air supply pressure or Power supply voltage | Power: AC 200V±10% 50Hz Or Power: AC 380V±10% 50Hz |
| Connector | Normal type: cable inlet 2-PF(G1/2〞) Explosive proof: Protection jacket PF(G3/4〞) |
| Direct action | Input signal increase, stem descend, valve close. |
| Reaction | Input signal increase, stem ascend, valve open. |
| Input signal | Input/output4～20mA.DC |
| Lag | ≤0.8%FS |
| Linear type | ≤+1%FS |
| Environmental temperature | Standard type: -10℃～+60℃ With space heater : -35℃～+60℃ Explosive proof: -10℃～+40℃ |
| Electric control valve Accessories | Space heater (normal type) Non-standard accessories, need special customized notes. |
4~20mA Sleeve type high pressure electric control valve parameter
| Nominal diameterDN | 25 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | 350 | 400 |
| Rated flow coefficient Kv | 11/10 | 27/25 | 44/40 | 69/63 | 110/100 | 176/160 | 275/250 | 440/400 | 690/630 | 940/850 | 1200/1050 | 1400/1225 | 1600/1400 |
| Nominal pressurePN MPa | 1.6 4 6.4 | ||||||||||||
| match DKZ actuator | DKZ-4200 | DKZ-4300 | DKZ-5400 | DKZ-5500 | DKZ-5600 | ||||||||
| match Cepai actuator | A+Z64 | A+Z160 | |||||||||||
| Rated travel mm | 16 | 25 | 40 | 60 | 100 | ||||||||
| Flow characteristic | Equal percentage linear | ||||||||||||
| Action mode | Input signal increase, valve close or opposite | ||||||||||||
| Temperature range | Normal temperature:-20～200℃ thermal Fin type:-60～450℃ | ||||||||||||
Note: Large size single-seat control valve can be customized according to user requirement
Product detail pictures:
Related Product Guide:
"Control the quality by the details, show the strength by quality". Our company has strived to establish a highly efficient and stable staff team and explored an effective quality control process for OEM manufacturer Honeywell Electric Control Valve - 4~20mA Sleeve type high pressure electric control valve – Hoyee , The product will supply to all over the world, such as: Amsterdam, Leicester, Somalia, We'll initiate the second phase of our development strategy. Our company regards "reasonable prices, efficient production time and good after-sales service" as our tenet. If you are interested in any of our products and solutions or would like to discuss a custom order, make sure you feel free to contact us. We've been looking forward to forming successful business relationships with new clients around the world in the near future.
By Doreen from Berlin - 2017.09.16 13:44
Sales manager is very enthusiastic and professional, gave us a great concessions and product quality is very good,thank you very much!
By Claire from Morocco - 2018.12.25 12:43
Write your message here and send it to us
Products categories
-
High reputation Peg Tube 3 Way Valve - CF8 sta...
-
OEM/ODM Supplier Enteral Feeding Valve - CF8 s...
-
Trending Products Pneumatic Valve High Pressure...
-
China Supplier 2 Inch Electric Butterfly Valve ...
-
Popular Design for 6 Inch Pneumatic Valve - Pi...
-
Renewable Design for Electric Motor Operated Bu...
