China Good quality Pneumatic Remote Control Valve - Pneumatic control valve single seat – Hoyee factory and manufacturers

Good quality Pneumatic Remote Control Valve - Pneumatic control valve single seat – Hoyee

Short Description:

Product Detail

Product Tags

Feedback (2)

The key to our success is "Good Product Quality, Reasonable Value and Efficient Service" for Enteral Feeding Valve, 1 2 Ball Valve With Electric Actuator, Pneumatic Valve Remote Control System, We focus on generating own brand and in combination with a lot of experienced expression and first-class equipment . Our goods you worth have.

Good quality Pneumatic Remote Control Valve - Pneumatic control valve single seat – Hoyee Detail:

Pneumatic control valve Use and characteristics

1 applications and characteristics of pneumatic control valve structure of a right angle turn, it is supporting the use of valve positioner, the ratio can be adjusted; type V valve adjustment for a variety of occasions, with a rated flow coefficient, adjustable ratio, good sealing effect, regulating the performance of sensitive, small volume, vertical horizontal installation. Applicable to control of gas, steam, liquids and other media.

2 Pneumatic control valve characteristic: the structure of a right angle turn, by the V type valve, pneumatic actuator, positioner and other accessories; there is a nearly 100 than the inherent flow characteristics; dual bearing structure, the starting torque is small, with excellent sensitivity and speed sensors; shear capacity of strong.

3 pneumatic piston executing agency for the use of compressed air power source, through the piston’s movement led to a 90 degree turn, to enable the automatic gate valve. Its components are: adjustment bolt, the executive body box, crankshaft, cylinder block, cylinder, piston, connecting rod shaft, cardan shaft.

4 the working principle of pneumatic control valves: pneumatic control valve by the implementing agencies and regulatory agencies. Executing agency is the thrust control valve components, which according to the control signal pressure to produce the thrust, push the adjustment mechanism of action. Valve is a pneumatic control valve adjustment parts, it has a direct contact with the media regulator, regulating the flow of the fluid.

Main technical specification

Nominal Diameter(mm)		15	20	25	32	40	50	65	80	100	125	150	200
Rated flow coefficient Kv	Equal percentage	3	6	10	16	25	40	63	100	160	250	400	630
	Liner	4	7	11	18	28	44	69	110	176	275	440	690
Actuator Model	Direct action	PZMA-4			PZMA-5			PZMA-6			PZMA-7
	Reaction	PZMB-4			PZMB-5			PZMB-6			PZMB-7
Rated Stroke L(mm)		16			25			40			60
Diaphragm Effective Area		280			400			600			1000
Nominal Pressure PN(MPA)		1.6 2.5 4.0 6.3 10.0
Inherent flow Characteristics		Equal percentage、Liner
Inherent rangeability		50:01:00
The range of air source signals		20~100、40~200、80~240
Gas source pressure(Mpa)		0.14、0.25、0.28、0.4
Electric actuator		Depand on the thrust and stroke which valve need
Power voltage		220V.AC 50Hz 380V.AC 50Hz( Three phase)
Leakage class	Soft seal	VI Class、Zero Leakage
	Metal seal	IV Class、V Class
Flange connection form		PN1.6Mpa, Convexity of valve body PN≥4.0Mpa,Concavity of valve boday
Upper bonnet form	Standard type	Case Steel:-20~220°C、Cast Stainless steel:-40~220°C
	Cooling type	Case Steel:-29~425°C、Cast Stainless steel:-60~450°C
	Cryogenic	Cast Stainless steel:-60~-100°C、-100~-196°C

Main Performance Index

No	Item	Standard Type	Cooling、cryogenic type
1	Intrinsic Error＜（%）	±1	±3
2	Return difference＜（%）	1	3
3	Dead band＜（%）	0.4	1
4	Origin-destination deviation＜（%）	±1	±2.5
5	Rated stroke deviation＜（%）	+2.5	+2.5

Our Advantage

1. 15 years of experience of valves
2. Consistent product quality and reduction of defective productivity
3. Significant cost reduction versus competitors
4. 1 year of warranty time

Q: Are You Trading Company Or Manufacturer ?
A: We are factory.

Q: How Long Is Your Delivery Time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

Q: Do You Provide Samples ? Is It Free Or Extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q: What Is Your Terms Of Payment ?
A: Payment=1000USD, 30% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us

Product detail pictures:

Related Product Guide:

As a way to present you with ease and enlarge our enterprise, we also have inspectors in QC Workforce and assure you our greatest support and solution for Good quality Pneumatic Remote Control Valve - Pneumatic control valve single seat – Hoyee , The product will supply to all over the world, such as: Karachi, Hongkong, Nepal, We are your reliable partner in the international markets of our products. We focus on providing service for our clients as a key element in strengthening our long-term relationships. The continual availability of high grade products in combination with our excellent pre- and after-sales service ensures strong competitiveness in an increasingly globalized market. We are willing to cooperate with business friends from at home and abroad, to create a great future. Welcome to Visit our factory. Looking forward to have win-win cooperation with you.

2 Way Pneumatic Control Valve

Electro-Pneumatic Proportional Control Valve

Globe Control Valve With Pneumatic Actuator And Smart Positioner

Pneumatic Control Butterfly Valve

Pneumatic Control Gate Valve

Pneumatic Control Valve Honeywell

Pneumatic Control Valve China

Pneumatic Conveying Butterfly Valve

Pneumatic Globe Control Valve

Pneumatic Manual Control Valve

This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately， we successfully completed the procurement tasks.